MS Channel, also known as Mild Steel Channel, is a structural steel product with a distinctive C-shaped cross-section. It's made by hot-rolling mild steel, a low-carbon steel known for its strength and malleability. MS Channels are widely used in construction, manufacturing, and engineering due to their strength, versatility, and cost-effectiveness. They can be customized and cut to specific lengths for various applications.

Copper fittings are components used to join, redirect, or terminate copper pipes in plumbing, HVAC, and other fluid transfer systems. They come in various shapes and sizes, like elbows, tees, couplings, and reducers, and are known for their durability, corrosion resistance, and ease of installation, particularly with soldering, brazing, or compression methods.

Mounting clamps are tools used to secure objects by gripping them firmly. They are versatile and come in various forms, like F-clamps, C-clamps, and P-clamps, each designed for specific applications to prevent movement or displacement.

 

Glands are mechanical fittings used to securely connect and seal the entry point of cables or pipes into equipment like electrical panels, junction boxes, or machinery. They provide strain relief, environmental sealing, and protection from dust, water, and chemicals.

A globe valve is a type of valve used to control the flow of fluids in a pipeline, typically by regulating the flow rate or completely shutting it off. It's characterized by a disc that moves perpendicular to the flow path to either open, close, or modulate the flow. Globe valves are commonly used in both on/off and throttling applications.

A Receiver (or liquid receiver) is a storage tank located after the condenser. It's primarily designed to hold excess liquid refrigerant that isn't immediately needed for cooling, ensuring a consistent supply to the expansion valve and preventing issues like refrigerant starvation. Receivers also help manage pressure fluctuations and can act as a reservoir during system pump-down.

 

An Accumulator is a crucial safety device, particularly in heat pumps and air conditioning units. Its primary function is to prevent liquid refrigerant from entering the compressor, which could cause severe damage. It acts as a reservoir, temporarily storing excess liquid refrigerant and ensuring only vapor reaches the compressor.

A Vibration eliminator is a device, often a flexible hose, designed to absorb and dampen vibrations produced by components like compressors, preventing them from being transmitted to the surrounding piping and structure. This minimizes noise, reduces stress on the system's components, and helps prevent potential damage.

A Solenoid valve is an electrically controlled valve that regulates the flow of fluids like refrigerants, water, or air. It uses an electromagnetic coil to open or close the valve, enabling precise control of flow based on system demands, enhancing efficiency and comfort.

A Drain heater, also known as a heat tracer, is a device used to maintain the temperature of liquids or gases in pipes and drainage systems, preventing them from freezing or solidifying in cold environments. They are particularly useful in industrial settings for maintaining the flow of various mediums like water, oil, and other liquids or gases.

A Door heater, also known as an air curtain or over-door heater, is a device designed to create a barrier of warm or cold air above a doorway, preventing the exchange of air between two spaces. They are commonly used in commercial settings to maintain comfortable temperatures inside while allowing doors to remain open for customer access.

An Expansion valve, a crucial component in refrigeration and air conditioning systems, reduces the high-pressure liquid refrigerant to a low-pressure, low-temperature state. This pressure drop allows the refrigerant to evaporate in the evaporator, absorbing heat and cooling the surrounding space. The expansion valve regulates the flow of refrigerant, ensuring efficient system operation.

A Thermostat is a device that controls the temperature of a space by regulating heating and cooling systems. It acts as the brain of the system, allowing users to set their desired temperature and maintaining it by activating or deactivating heating or cooling equipment as needed. Smart thermostats can also offer features like programmable schedules, remote control, and even diagnostics for technicians.

A Pressure switch is a safety device that monitors pressure levels in refrigerant lines or other parts of the system. It acts as a safeguard, typically shutting off the compressor if the pressure gets too high or too low, preventing potential damage to the system.

Pressure gauges are used to measure the pressure of gases or liquids, which is crucial for monitoring system performance and diagnosing issues. They ensure proper airflow, refrigerant levels, and overall system efficiency. These gauges, both mechanical and digital, help technicians identify problems like blockages or leaks by monitoring pressure levels.